Ruthless Racing SEA-DOO ECU Remote Tuning Device by Hptuners RTD3+ Flash: RTD is a tune delivery device. It allows customers to send vehicle read files and share data logs directly to their tuner, and receive professional calibration files to flash to their watercraft via the TDN App.
Tune Delivery Network (TDN) is the new standard for remote tune delivery Send your tuner pwc read files and data logs and receive professional calibration files to flash to your seadoo using the free-to-download TDN app-available for iPhone and Android. The TDN app syncs with the RTD device via Bluetooth, removing the laptop from the equation when licensing and writing tunes to your Watercraft
This is a great way to get the add speed and performance on your personal watercraft. They eliminate the GPS limiter and control parameters in the ECU such as, RPM limits, fuel tables, ignition timing and throttle response. Unlike others, our tunes are configured throughout the RPM range for great throttle response, top speed and better fuel efficiency.
The RTD offers full iOS and Android support with the TDN App.
Ruthless Racing SEA-DOO Carbon Fiber Rear Air Intake Kit: The rear air intake kit feeds your supercharged engine direct air delivering greatly improved acceleration and top speed. Replaces restrictive stock air box with a high-volume 4 inch Marine Grade K&N air filter. Simple installation & easy location gives you a clean look and access to your engine compartment.
Ruthless Racing SEA-DOO Catch Can/Engine Breather Kit: Easy to install catch can/oil breather eliminates power-robbing crankcase fumes and oil vapor from your engine's air intake. Increases horsepower by removing the engine's requirement to burn relatively non-combustible oil. Also improves intercooler efficiency by preventing the oil sludge coating that lowers thermal efficiency.
Ruthless Racing SEA-DOO INTERCOOLER TUBING UPGRADE KIT WITH Blow Off Valve: Recommended upgrade that replaces the soft hoses with much stronger. This will allow them to last longer and remove some of the loss that the stock pipes have because of expansion. The blow off valve helps the clutches last longer.
Ruthless Racing SEA-DOO IMUK (Intake Manifold Upgrade Kit): Enables your engine to produce more horsepower through increased boost pressure (+1lb). Supplied hole saw & cutting fixture allow easy removal of restrictive screen element from inside of intake manifold. Special o-ringed, billet block-off plug fills opening left after removal of screen element.
Ruthless Racing Pitch Solas 161mm 3-blade Concord Impeller: Increases low-end thrust and top-end speed on Sea-Doo 300 HP PWCs. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation.
Ruthless Racing SEA-DOO Titanuim valve retainers and Rocker Bolts: Lightweight and add additional spring tension to the valve spring for more control in higher RPM applications. Rocker bolts are one time use and need to be replaced.
Ruthless Racing SEA-DOO Billet Racing camshaft: Delivers unbelievable acceleration by increasing torque and horsepower resulting in a gain of 450 - 550 RPM and 4-6 MPH. Excellent for recreational or high-performance application.
Ruthless Racing SEA-DOO 300 Supercharger wheel: The 18lb wheel is a direct drop in wheel with no modification needed.
Ruthless Racing SEA-DOO Bosch VT1100 Injectors: The injectors are required to supply the necessary fuel necessary for the larger supercharger wheel.
Ruthless Racing SEA-DOO Intake Girddle: Secures the intake from coming apart as the 2 peices are glued together. This goes over the 2 pieces and holds like a big clamp Kit provides added strength to the Sea-Doo 1503 & 1630 Rotax engine intake manifold. The billet aluminum bracket clamps around the side of the manifold easily without drilling or grinding of the stock manifold providing extra support to the joint that is known to split under higher boost pressures on modified craft. Anodized to prevent corrosion and includes stainless hardware. .
Ruthless Racing SEA-DOO 300 Supercharger wheel 72/142: The 22lb wheel that needs the rear and front housing modified. contact your local machine shop for modification. We sale OEM Sea-Doo Front Housing & Rear Housing Set Machined To Fit
Ruthless Racing SEA-DOO 300 Open Loop Cooling Kit: Our Sea-Doo 230/300 Open Loop Cooling Kit dramatically reduces engine operating temperatures for improved performance & reliability. Includes adjustable water flow regulator for optimum temperature control. Original closed loop system becomes quickly heat soaked in high performance applications. Open loop system increases cooling efficiency via steady supply of cool external water.
RUTHLESS SEA-DOO 4-TEC 4-BOLT SUPER PUMP SEAL (Launch Pump Seal):
PERFECT FOR LAUNCHING 🚀 ZERO CAVITATION
These upgraded performance seals deliver improved acceleration and reduced cavitation. Directly replaces the weak OEM seal that often fails in performance applications.
ARP SEA-DOO 1503/1630 CYLINDER HEAD STUD KIT:
ultra high strength cylinder head stud kit is essential equipment when upgrading internal components on your high boost Sea-Doo engine. Precision machined from premium grade 8740 alloy and heat treated to exacting tolerances, these studs dramatically increase reliability & ease of maintenance.
FUELTECH NANO WIDEBAND W/ 02 sensor & 6FT HARNESS:
FUELTECH AFR OR LAMBDA UNIT
W/ 3FT UNTERMINATED HARNESS
BOSCH LSU 4.2 SENSORS.