Designed for use with the RTD, the PROLINK+ cable allows users to input 2x analogue signals (from a wideband sensor (AFR), map sensor, boost pressure sensor etc.) and 1x CAN bus signal simultaneously. This cable is a necessity for the RTD to be able to monitor and record AFR (Air Fuel Ratio) data on the TDN app, this then sends the information to Ruthless Racing for a custom tune to be written for your engine.
- 2x dedicated 0-5V analogue inputs.
- 1x CAN bus input (500kbps).
- 100Hz sampling rate.
- M8 connector to 5 wire harness.
- For MPVI2+ MPVI3 and RTD interfaces.
- MPVI2+ interfaces must purchase Pro Feature Set to be able to use the PROLINK+ cable.
NOTE: PRO FEATURE SET IS NOT REQUIRED FOR THE RTD FROM RUTHLESS.
PROLINK+ for MPVI3 Devices and RTD
MPVI3 interface is supplied standard with Pro Feature Set. You only need to purchase the PROLINK+ cable to add the benefits of inputting signals from various sensors. No other purchase is required.
PROLINK+ for MPVI2+ Devices
To use the PROLINK+ cable with an MPVI2+ interface, the Pro Feature Set will need to be purchased from HP Tuners. The PROLINK+ cable will be provided FREE of charge (plus shipping) with the purchase of Pro Feature Set. If you would like additional PROLINK+ cables for multiple watercraft, you can purchase them on this page.
Pro Feature Set
Pro Feature Set also unlocks standalone data logging, allowing you to save logs to your devices internal storage with ought the need of a laptop. This makes it easier than ever to collect data while on the water. This data can then be sent straight to your tuner from your smart phones Bluetooth connection to the device through the TDN app.